CTEK Battery Conditioners

CTEK 3600 Battery Charger and Conditioner

AUTOMATIC BATTERY MANAGEMENT

The CTEK 3600 Battery Charger and Conditioner eliminates the worry of infrequent use
by initially charging a discharged battery and then
keeping occasionally used batteries in top condition
24 hours a day, safely & without overcharging

The ONLY battery conditioner utilising
the very latest Primary Switching technology
Other battery conditioners employ an internal transformer utilising Linear technology.
Linear technology simply transforms the input voltage of 240v but also transfers any
spikes and voltage fluctuations in the mains supply.
These spikes can, and do, damage electronic equipment fitted to the vehicle, such as
Engine Management Systems and in-car entertainment.

Primary Switching on the other hand, utilises a purely electronic transformation
of the voltage from 240 to 12 volts, thus eliminating the transmission of any spikes.

 


Suitable for all 12v motorcycles, cars, vans, boats, caravans etc

Designed for 12 Volt Batterys - Charger and Conditioner
Free connector kit included for difficult to reach batteries
Monitors voltage and turns on & off automatically
Can be used without disconnecting the car electrics
Can charge negative & positive earth vehicles
Waterproof case for vehicles kept outside

The Multi XS 3600 battery charger is the first PRIMARY SWITCHED charger of its kind.
This allows it to charge at a higher rate without gassing or damaging vehicle electrics with spikes of power.
The CTEK3600 has combined all the benefits of a trickle / float with the power of a conventional charger.
The important factor is that the Multi XS 3600 constantly monitors the voltage after it has charged the battery, and then only pulse’s the battery when the voltage drops due to alarms or natural drainage.
This eliminates the danger of over charging the battery.

The Multi XS has three charging modules, its ‘bulk’ mode will charge a flat battery up to 85% efficiency.
It will then switch to ‘absorption’ mode when it conditions the battery at a constant voltage to almost 100%.
Then t switches to ‘pulse’ mode, at this point it is monitoring the voltage and
if the voltage falls to 95% it will pulse the battery back to 100%.

Primary switched technology allows faster safer charging without gassing. Designed to be left connected for long periods. Suitable for use on batteries from 1.2Ah to 120Ah. Supplied with connection kit for difficult to reach batteries.
Maximum charge voltage of 14.7v – 3.6amps.


If you're laying up your bike, car, boat, snowmobile - connect up the battery to the CTEK 3600 Battery Conditioner and Charger and leave it for as long as you like. The CTEK 3600 will ensure your battery is kept at optimum voltage and charge at all times, without gassing or overcharging!

If your bike or car is fitted with an alarm / immobiliser the CTEK 3600 will automatically compensate for the drain on the battery by the alarm,
ensuring your vehicle is fully protected at all times!

CTEK 3600 Battery Charger / Conditioner

Click for full
size image


Employs latest Primary Switching technology
No transmission of damaging 'spikes'
No transformer, so no heat given off
Conditioner switches on and off automatically

Diagnostic LED monitoring display
Voltage check facility
Suitable for all 12v batteries
May be connected indefinitely, unsupervised
Integrated Thermal Cut-out safety feature
Safe to use with sealed gel batteries
Unsupervised maintenance prolongs battery life
Polarity warning LED
12 month guarantee
Can be used with batteries from 1.2 to 120 Ah

Price: £49.95 inc Vat

DIN BMW-type
Accessory Plug & Socket

Prices:
Plug:
£5.95
Socket:
£6.95

hellapands.jpg (12448 bytes)

Click for full size image

This accessory socket can be fitted permanently to your vehicle enabling the CTEK 3600 to be connected and disconnected at will.
The socket comes complete with a weather proof cover. The plug has an adapter for use with a standard cigarette lighter